firmly apply the handbrake and undo the front wheel nuts, then jack the front end of the car up and rest it firmly on axle stands before removing the front roadwheels. For thorough check, remove and clean the brake pads and check the operation of the caliper and check the condition of the brake disc on both the sides. Any set of pads where any pad's friction material is worn to the specified thickness or less must be renewed as a set. After checking the front brakes, refit the front roadwheels, lower the car to the ground and tighten the roadwheel nuts to the specified torque. To repeat the check on the rear brakes, check the rear brakes, chock the front wheels, loosen the rear wheel nuts, jack up the rear of the car and support the car on axle stands before removing the rear roadwheels. On completion, refit roadwheels, lower car to floor and tighten rear roadwheel nuts to given torque.