How to remove and refit Windshield Wiper Motors and Wiper Linkage on Volvo V70?

To remove the wiper motor and linkage, turn the wipers on and off to make sure they are parked. Next, remove the arms of the windscreen wipers and open the bonnet to remove the plastic panels of trim on the front lower corners of the windscreen by prising out the clips. Then, push in the centre pins and lever out the four plastic rivets holding the scuttle trim panel in place taking care to catch the easily lost centre pins. Connect the wiper motor wiring plug, undo the bolts and remove the linkage/frame assembly. Then mark the position of the motor crank arm in relation to the frame, undo the nut and remove the motor crank arm. Remove the motor by undoing the three retaining bolts Remember the frame and linkage arms are a one-piece assembly. For refitting, you need to secure the motor to the frame using the three bolts and if a motor is a new one, you need to temporarily reconnect the wiring connectors, switch on the motor and then switch it off (to make sure it is parked). Line up the crank arm with the marks made during removal, hold the crank arm in a spanner to stop it turning and tighten the nut. If a new frame and linkage are being fitted, set the motor to the park position and hook up the crank arm so that it is parallel with the linkage arm above. Finally, reassemble the pieces you just took down by doing the opposite of what you just did.

Genuine Volvo V70 Windshield Wiper Motors

Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Windshield Wiper Motors found

View related parts
Volvo V70 Wiper Motor Part Number: 31290787
$277.66 MSRP: $361.53
You Save: $83.87 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Windshield Wiper Motors; Windshield Wiper Motor; Rear Motor
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2008-2010 | 3.2 | 6 Cyl 3.2 L GAS
View related parts
Volvo V70 Wiper Motor Part Number: 8667188
$349.04 MSRP: $454.48
You Save: $105.44 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; Windshield Wiper Motors; Windshield Wiper Motor; Rear Motor, Wiper Motor
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2007 | 2.4, 2.5T, 2.5T AWD, R, T5 | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volvo V70 Wiper Motor Part Number: 9154525
$349.04 MSRP: $454.48
You Save: $105.44 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; Windshield Wiper Motors; Rear Motor, Wiper Motor
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2001-2005 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5, X/C | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volvo V70 Wiper Motor Part Number: 8648343
$349.04 MSRP: $454.48
You Save: $105.44 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; Windshield Wiper Motor; Windshield Wiper Motors; Front Motor, Wiper Motor
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2001-2007 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5, X/C | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volvo V70 Wiper Motor Part Number: 31333456
$624.05 MSRP: $826.35
You Save: $202.30 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; Windshield Wiper Motors; Wiper Linkage; Front Motor, Motor & Linkage, Wiper Motor
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2008-2010 | 3.2 | 6 Cyl 3.2 L GAS
View related parts
Volvo V70 Wiper Motor Part Number: 3512391
$307.13 MSRP: $365.63
You Save: $58.50 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; Windshield Wiper Motors; Rear Motor, Wiper Motor
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1998-2000 | AWD, Base, GLT, GLT SE, R, R AWD, T5, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS

Volvo V70 Windshield Wiper Motors

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Windshield Wiper Motors and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo V70 parts. The prices are unbeatable, allowing you to get value for money. Each genuine V70 Windshield Wiper Motors comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo V70 Windshield Wiper Motors Parts and Q&A

Wiper Motor
3512391
Q: How to remove and refit Windshield Wiper Motors and Wiper Linkage on Volvo V70?
A:
To remove the wiper motor and linkage, turn the wipers on and off to make sure they are parked. Next, remove the arms of the windscreen wipers and open the bonnet to remove the plastic panels of trim on the front lower corners of the windscreen by prising out the clips. Then, push in the centre pins and lever out the four plastic rivets holding the scuttle trim panel in place taking care to catch the easily lost centre pins. Connect the wiper motor wiring plug, undo the bolts and remove the linkage/frame assembly. Then mark the position of the motor crank arm in relation to the frame, undo the nut and remove the motor crank arm. Remove the motor by undoing the three retaining bolts Remember the frame and linkage arms are a one-piece assembly. For refitting, you need to secure the motor to the frame using the three bolts and if a motor is a new one, you need to temporarily reconnect the wiring connectors, switch on the motor and then switch it off (to make sure it is parked). Line up the crank arm with the marks made during removal, hold the crank arm in a spanner to stop it turning and tighten the nut. If a new frame and linkage are being fitted, set the motor to the park position and hook up the crank arm so that it is parallel with the linkage arm above. Finally, reassemble the pieces you just took down by doing the opposite of what you just did.