How to properly remove and reinstall the track rod end while considering the Rack and Pinion Boot on Volvo V70?

Count and record the number of exposed threads on the track rod, from the end of the rod to the track rod end locknut. Remove the track rod end on the side concerned by unscrewing the locknut from the track rod. Release the two clips and peel off the gaiter. Clean out any dirt and grit from the inner end of the track rod and, when accessible, the rack. Wrap insulating tape around the track rod threads to protect the new gaiter during installation. Refit the track rod end locknut, positioning it so that the same number of threads counted on removal are visible, and then refit the track rod end.

Genuine Volvo V70 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Rack and Pinion Boots found

View related parts
Volvo V70 Tie Rod Boot Part Number: 271601
$54.53 MSRP: $69.31
You Save: $14.78 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Rack & Pinion Boot/Bellows Kit; Boot, Boot Kit, Inner Tie Rod Boot, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1998-2004 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, GLT, GLT SE, R, R AWD, T5, X/C, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volvo V70 Tie Rod Boot Part Number: 272418
$56.83 MSRP: $72.22
You Save: $15.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Cylinder Boot Kit; Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2001-2007 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5, X/C | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volvo V70 Tie Rod Boot Part Number: 30776251
$65.70 MSRP: $84.85
You Save: $19.15 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Output: Steering Bellows Kit; Rack And Pinion Boot; Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2008-2010 | 3.2 | 6 Cyl 3.2 L GAS
View related parts
Volvo V70 Tie Rod Boot Part Number: 31406473
$65.70 MSRP: $84.85
You Save: $19.15 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bellows Kit; Power Steering Cylinder Boot Kit; Boot Kit, Tie Rod Boot
- Replaces: 30776252
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2008-2010 | 3.2 | 6 Cyl 3.2 L GAS
View related parts
Volvo V70 Boot Kit Part Number: 9191409
Product Specifications
- Other Name: Power Steering Boot Kit; Rack And Pinion Boot; Boot Kit
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1998-2000 | AWD, Base, GLT, GLT SE, R, R AWD, T5, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS

Volvo V70 Rack and Pinion Boot

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Rack and Pinion Boot and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo V70 parts. The prices are unbeatable, allowing you to get value for money. Each genuine V70 Rack and Pinion Boot comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo V70 Rack and Pinion Boot Parts and Q&A

Tie Rod Boot
271601
Q: How to properly remove and reinstall the track rod end while considering the Rack and Pinion Boot on Volvo V70?
A:
Count and record the number of exposed threads on the track rod, from the end of the rod to the track rod end locknut. Remove the track rod end on the side concerned by unscrewing the locknut from the track rod. Release the two clips and peel off the gaiter. Clean out any dirt and grit from the inner end of the track rod and, when accessible, the rack. Wrap insulating tape around the track rod threads to protect the new gaiter during installation. Refit the track rod end locknut, positioning it so that the same number of threads counted on removal are visible, and then refit the track rod end.