To remove the warning triangle, rotate the fasteners anti-clockwise and take it off the trim panel. Next, release the clips to detach the boot inner trim panel by pulling it away from the boot lid. Make a note of the fitted positions, then disconnect the boot wiring plugs and release the loom grommet from the boot lid. Open the boot and mark around the hinges for alignment during refitting, then undo the two screws on each side that secure the hinges to the boot lid. It is advisable to have an assistant support the boot lid while pulling the wiring loom out as the lid is withdrawn. For refitting, reverse the removal operations, ensuring to check the fit and closure of the boot lid, making adjustments as necessary.