How to remove and refit the components, including the Valve Cover and associated hoses on Volvo S80?

To remove the components, first remove the cable tie holding the servo hose in place on the engine cross-stay, if applicable. Next, undo the nuts or bolts to remove the engine cross-stay from the front suspension turrets. Pull the plastic engine cover straight up and force it out of the engine compartment. Remove the fuel injectors and high-pressure fuel pipes, and release the clamp that holds the crankcase ventilation hose to the camshaft cover. Remove the hose bracket from the cylinder head by unscrewing it and loosen the clamps and release the intake hose from the intake manifold. For 05244 T4 to T7 engines, slacken the clamp to remove the breather hose from the oil separator, slacken the banjo bolt and turn the fuel return pipe away from the camshaft cover. Remove the upper/rear engine mounting bracket by undoing the bolts, disconnect the required wiring plugs and place the wiring harness out of the way after removing the cable duct screws. Undo the screws to remove the camshaft cover, disposing of the old gasket and making sure that the mating surfaces of the cylinder head and camshaft cover are cleaned thoroughly without damage. For refitting, do the reverse of removing, so that new gaskets are properly seated on the cylinder head for 05244 T to T3 engines; rubber sealing gasket is left in place for 05244 T4 to T7 engines. Finally, tighten camshaft cover retaining nuts to specified torque beginning from the center and working outward.

Genuine Volvo S80 Valve Cover

Cylinder Head Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Valve Covers found

View related parts
Volvo S80 Valve Cover Part Number: 1270363
$19.46 MSRP: $24.92
You Save: $5.46 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Top Cover, Valve Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD | 5 Cyl 2.5 L GAS
View related parts
Volvo S80 Engine Cover Part Number: 31216618
$79.05 MSRP: $101.28
You Save: $22.23 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Casing 2602; Valve Cover; Engine Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007 | V8 | 8 Cyl 4.4 L GAS
View related parts
Volvo S80 Engine Cover Part Number: 31251470
$150.85 MSRP: $194.79
You Save: $43.94 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Casing; Valve Cover; Engine Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007-2010 | V8 | 8 Cyl 4.4 L GAS
View related parts
Volvo S80 Engine Cover Part Number: 31251472
$150.85 MSRP: $194.79
You Save: $43.94 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Casing; Valve Cover; Engine Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007-2010 | V8 | 8 Cyl 4.4 L GAS
View related parts
Volvo S80 Engine Cover Part Number: 31338797
$150.85 MSRP: $194.79
You Save: $43.94 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Casing; Valve Cover; Engine Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2015-2016 | T5, T5 Platinum | 4 Cyl 2.0 L GAS
View related parts
Volvo S80 PCV Valve Part Number: 32140004
$179.12 MSRP: $231.29
You Save: $52.17 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Trap; Engine Valve Cover; PCV Valve Oil Trap; Cover, Oil/Air Separator, PCV Valve, Valve Cover
- Replaces: 31430923, 31670210, 32242753
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2015-2016 | T5, T5 Platinum, T6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
Volvo S80 Valve Cover, Passenger Side Part Number: 30720093
$218.08 MSRP: $283.95
You Save: $65.87 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007-2010 | V8 | 8 Cyl 4.4 L GAS
View related parts
Volvo S80 Valve Cover, Driver Side Part Number: 30720094
$217.43 MSRP: $283.11
You Save: $65.68 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Valve Cover, Left
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007-2010 | V8 | 8 Cyl 4.4 L GAS
View related parts
Volvo S80 Valve Cover Part Number: 31319642
$217.43 MSRP: $283.11
You Save: $65.68 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Trap; Engine Valve Cover; PCV Valve Oil Trap; Valve Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007-2014 | 3.2 | 6 Cyl 3.2 L GAS
View related parts
Volvo S80 PCV Valve Part Number: 31319643
$217.43 MSRP: $283.11
You Save: $65.68 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Trap; Engine Valve Cover; PCV Valve Oil Trap; Vent Valve; Cover, PCV Valve, Valve Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2008-2015 | T6 | 6 Cyl 3.0 L GAS
View related parts
Volvo S80 Engine Cover Part Number: 30757827
$260.92 MSRP: $339.74
You Save: $78.82 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Casing; Valve Cover; Engine Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2007-2014 | 3.2 | 6 Cyl 3.2 L GAS
View related parts
Volvo S80 Engine Cover Part Number: 30757829
$590.13 MSRP: $781.42
You Save: $191.29 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Casing; Valve Cover; Engine Cover
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2008-2015 | T6 | 6 Cyl 3.0 L GAS

Volvo S80 Valve Cover

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Valve Cover and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo S80 parts. The prices are unbeatable, allowing you to get value for money. Each genuine S80 Valve Cover comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo S80 Valve Cover Parts and Q&A

Valve Cover
1270363
Q: How to remove and refit the components, including the Valve Cover and associated hoses on Volvo S80?
A:
To remove the components, first remove the cable tie holding the servo hose in place on the engine cross-stay, if applicable. Next, undo the nuts or bolts to remove the engine cross-stay from the front suspension turrets. Pull the plastic engine cover straight up and force it out of the engine compartment. Remove the fuel injectors and high-pressure fuel pipes, and release the clamp that holds the crankcase ventilation hose to the camshaft cover. Remove the hose bracket from the Cylinder Head by unscrewing it and loosen the clamps and release the intake hose from the intake manifold. For 05244 T4 to T7 engines, slacken the clamp to remove the breather hose from the oil separator, slacken the banjo bolt and turn the fuel return pipe away from the camshaft cover. Remove the upper/rear engine mounting bracket by undoing the bolts, disconnect the required wiring plugs and place the wiring harness out of the way after removing the cable duct screws. Undo the screws to remove the camshaft cover, disposing of the old gasket and making sure that the mating surfaces of the cylinder head and camshaft cover are cleaned thoroughly without damage. For refitting, do the reverse of removing, so that new gaskets are properly seated on the cylinder head for 05244 T to T3 engines; rubber sealing gasket is left in place for 05244 T4 to T7 engines. Finally, tighten camshaft cover retaining nuts to specified torque beginning from the center and working outward.