How to replace halogen bulbs and ensure proper headlight aiming on Volvo 940?

To replace the halogen bulbs, open the vehicle's hood and secure the hood. If applicable remove the access cover to the headlight bulb and socket assembly. For bulbs with locking rings, twist and remove the ring, for bulbs without, twist the bulb socket and withdraw the assembly. Gently pry out the electrical connector's retaining clip if needed then remove the bulb and socket assembly. Before installing a new bulb always make sure all electrical contact surfaces are clean. Aligned the replacement assembly with the electrical connector and pushing it firmly until the spring clip latches. Activate the switch and see if the bulb lights up, if it doesn't troubleshoot the bulb circuit or switch. Position the new bulb and lock the locking ring if applicable and reinstall the access cover and close the hood. For sealed beam units, disconnect the battery cable, release the headlight trim, unfasten the screws holding the retainer and unplug the electrical connector. Following installation is in the reverse order. Proper aiming of headlights is very important to ensure safe illumination of the road and should be checked periodically, especially after bulb replacement or front-end work. A temporary adjustment can be made using a wall; park the vehicle on a level surface facing a wall and mark the low and high beam positions and make the adjustments to the beams accordingly. Make sure that the vehicle is in the same position during this process and have the adjustment checked by a professional as soon as possible.

Genuine Volvo 940 Headlight

Headlamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Headlights found

View related parts
Volvo 940 Headlamp Assembly, Driver Side Part Number: 1369603
$216.80 MSRP: $258.10
You Save: $41.30 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Left; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1991-1995 | Base, GL, GLE, SE, T | 4 Cyl 2.3 L GAS
View related parts
Volvo 940 Headlamp Assembly, Passenger Side Part Number: 1369604
$216.80 MSRP: $258.10
You Save: $41.30 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Right; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1991-1995 | Base, GL, GLE, SE, T | 4 Cyl 2.3 L GAS
View related parts
Volvo 940 Composite Assembly, Passenger Side Part Number: 3534194
$226.96 MSRP: $270.19
You Save: $43.23 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Insert; Daytime Running Lights; Headlight; Composite Assembly, Headlamp
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1993-1995 | Base, T | 4 Cyl 2.3 L GAS
View related parts
Volvo 940 Headlamp Assembly, Driver Side Part Number: 9126610
$269.30 MSRP: $320.60
You Save: $51.30 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Left; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1995 | Base, T | 4 Cyl 2.3 L GAS
View related parts
Volvo 940 Headlamp Assembly, Passenger Side Part Number: 9126611
$327.46 MSRP: $389.83
You Save: $62.37 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Right; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1995 | Base, T | 4 Cyl 2.3 L GAS
View related parts
Volvo 940 Headlamp Assembly, Driver Side Part Number: 1358540
$316.22 MSRP: $376.45
You Save: $60.23 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Left; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1991-1995 | Base, GL, GLE, SE, T | 4 Cyl 2.3 L GAS
View related parts
Volvo 940 Headlamp Assembly, Passenger Side Part Number: 1358541
$343.50 MSRP: $408.93
You Save: $65.43 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Right; Daytime Running Lights; Headlight; Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1991-1995 | Base, GL, GLE, SE, T | 4 Cyl 2.3 L GAS

Volvo 940 Headlight

The Volvo 940 Headlight provides clear vision ahead of the car after the sun goes down and also lets other motorists be aware of your presence, hence it is an important safety feature. This Headlight unit, mounted on the front of the car, projects a controlled beam that illuminates the road and indicates your presence, which is legal for low and high beam requirements. The model has, over the years, had three primary light source technologies, all of which have struck a balance between cost, life and brightness. Halogen bulbs, which combine halogen gas with a tungsten filament, are the cheap but have a shorter lifespan. LED lights, often included on subsequent 940 models, consume little power, emit little heat and have the ability to stay bright for years before fading, which gives them a sharp modern look. Xenon high intensity discharge is based on a beam formed by using an arc with xenon gas, which emits a white or bluish light that rivals daylight but sells at a higher price point. The Volvo vehicles have factory wiring that supports halogen and advanced units, projector optics that concentrate illumination on more of the lane and daytime running rings that give flair. These options allow Volvo owners to suit their driving requirements and style preferences. Every Headlight design provides unique visual indicators. When operated correctly, all Volvo Headlights maintain the sound safety reputation for which the brand is reportedly so well known.

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Headlight and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo 940 parts. The prices are unbeatable, allowing you to get value for money. Each genuine 940 Headlight comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo 940 Headlight Parts and Q&A

Headlamp Assembly, Driver Side
1358540
Q: How to replace halogen bulbs and ensure proper headlight aiming on Volvo 940?
A:
To replace the halogen bulbs, open the vehicle's hood and secure the hood. If applicable remove the access cover to the headlight bulb and socket assembly. For bulbs with locking rings, twist and remove the ring, for bulbs without, twist the bulb socket and withdraw the assembly. Gently pry out the electrical connector's retaining clip if needed then remove the bulb and socket assembly. Before installing a new bulb always make sure all electrical contact surfaces are clean. Aligned the replacement assembly with the electrical connector and pushing it firmly until the spring clip latches. Activate the switch and see if the bulb lights up, if it doesn't troubleshoot the bulb circuit or switch. Position the new bulb and lock the locking ring if applicable and reinstall the access cover and close the hood. For sealed beam units, disconnect the battery cable, release the headlight trim, unfasten the screws holding the retainer and unplug the electrical connector. Following installation is in the reverse order. Proper aiming of headlights is very important to ensure safe illumination of the road and should be checked periodically, especially after bulb replacement or front-end work. A temporary adjustment can be made using a wall; park the vehicle on a level surface facing a wall and mark the low and high beam positions and make the adjustments to the beams accordingly. Make sure that the vehicle is in the same position during this process and have the adjustment checked by a professional as soon as possible.