How to replace the clutch cable assembly on Volvo 245?

Unhook the return spring for the release lever and slacken off the two adjusting nuts holding the outer cable sleeve to the housing boss, and take the inner cable off the clutch lever. Unscrew the adjustment nut on the back of the cable sleeve and pull the cable out of the housing boss. Remove the clutch pedal bearing bolt, and remove the inner cable from the clutch pedal, which leaves the cable open to removal from the car. To refit the new cable assembly, follow the reverse procedure of removal, and make sure that the cable is adjusted accordingly.

Genuine Volvo 245 Clutch Cable

Clutch Cable Wire

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Cable found

View related parts
Volvo 245 Release Cable Part Number: 1377669
$39.04 MSRP: $45.71
You Save: $6.67 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Cable; Release Cable
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1984-1989 | Base, DL, GL | 4 Cyl 2.1 L GAS, 4 Cyl 2.3 L GAS

Volvo 245 Clutch Cable

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Clutch Cable and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo 245 parts. The prices are unbeatable, allowing you to get value for money. Each genuine 245 Clutch Cable comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo 245 Clutch Cable Parts and Q&A

Release Cable
1377669
Q: How to replace the clutch cable assembly on Volvo 245?
A:
Unhook the return spring for the release lever and slacken off the two adjusting nuts holding the outer cable sleeve to the housing boss, and take the inner cable off the clutch lever. Unscrew the adjustment nut on the back of the cable sleeve and pull the cable out of the housing boss. Remove the clutch pedal bearing bolt, and remove the inner cable from the clutch pedal, which leaves the cable open to removal from the car. To refit the new cable assembly, follow the reverse procedure of removal, and make sure that the cable is adjusted accordingly.