How to remove the lower shaft from the rack and pinion boot and steering shaft on 2004 Volvo V70?

To remove lower shaft from steering rack pinion, use ratchet and socket to remove pinch bolt. Remove the trim panel, undo the universal joint pinch-bolt and remove the rubber boot. Refit by lining up the universal joint, tightening the new take pinch-bbolt and reassembling components.

Genuine 2004 Volvo V70 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinion Boots found

View related parts
2004 Volvo V70 Tie Rod Boot Part Number: 271601
$54.53 MSRP: $69.31
You Save: $14.78 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Rack & Pinion Boot/Bellows Kit; Boot, Boot Kit, Inner Tie Rod Boot, Tie Rod Boot
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 271601
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2004 Volvo V70 Submodels:
- 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, GLT, GLT SE, R, R AWD, T5, X/C, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
2004 Volvo V70 Tie Rod Boot Part Number: 272418
$56.83 MSRP: $72.22
You Save: $15.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Cylinder Boot Kit; Boot Kit, Tie Rod Boot
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 272418
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2004 Volvo V70 Submodels:
- 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5, X/C | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS

2004 Volvo V70 Rack and Pinion Boot Parts and Q&A

Q: How to remove the lower shaft from the rack and pinion boot and steering shaft on 2004 Volvo V70?
A: To remove lower shaft from steering rack pinion, use ratchet and socket to remove pinch bolt. Remove the trim panel, undo the universal joint pinch-bolt and remove the rubber boot. Refit by lining up the universal joint, tightening the new take pinch-bbolt and reassembling components.