Volvo 3518622 Signal Lamp, Driver Side

To replace the turn signal and parking lights on 1990-93 models, either unscrew the lens or disengage the bulb and socket assembly from the rear of the lens housing. Then, raise and support the hood. From inside the engine compartment, twist the socket counterclockwise to remove the bulb and socket assembly without detaching the electrical connector. Depress the bulb and twist it counterclockwise to remove it. Before installing a new bulb, ensure all electrical contact surfaces are clean and align the retaining pins correctly. Insert the bulb, twist it clockwise to secure it, and test its functionality.

To replace the turn signal and parking lights on 1990-93 models, either unscrew the lens or disengage the bulb and socket assembly from the rear of the lens housing. Then, raise and support the hood. From inside the engine compartment, twist the socket counterclockwise to remove the bulb and socket assembly without detaching the electrical connector. Depress the bulb and twist it counterclockwise to remove it. Before installing a new bulb, ensure all electrical contact surfaces are clean and align the retaining pins correctly. Insert the bulb, twist it clockwise to secure it, and test its functionality.

For 1994-98 models, pull the lamp assembly out, press the tabs to remove the bulb assembly, and turn the bulb to release it. Install a new bulb, ensuring the gasket is in place, and push the assembly until the tabs engage.