How to replace the right-hand differential seal for the side gear oil on Volvo S70?

To change the right hand differential side gear oil seal, first loosen the right hand side front wheel bolts, then jack up the front of the car and support on axle stands, and remove the right hand side front road wheel. Next, unbolt the ABS wheel sensor from the steering knuckle and unbolt the sensor wiring from the suspension strut bracket. Remove the bolt holding the brake hose and ABS wiring bracket to the inner wheel arch and, if necessary, remove the splash guard under the engine. Undo the nut and remove the clamp bolt that holds the suspension control arm balljoint to the steering knuckle, pushing down on the suspension arm if it is necessary to release the balljoint shank. If the balljoint is tight, use a chisel or large screwdriver to spread the slot in the steering knuckle, being careful not to ruin the balljoint dust cover. Remove the cap from the intermediate shaft support bearing by undoing two bolts and swivel the suspension strut and steering knuckle assembly outwards, pulling the intermediate shaft out of the transmission, resting it on one of the fluid pipes for the steering gear. Carefully prise out the oil seal in the transmission casing with a large screw driver or suitable lever without damaging the transmission casing and wipe clean the oil seal seating. Dip the new oil seal in clean oil, press it partially in the casing by hand, and then either use suitable tubing or a large socket to drive your new oil seal fully into position until flush with the edge of the casing. Refit the driveshaft from the top down tightening all nuts and bolts to the specified torque and ensuring that the ABS sensor and location in the steering knuckle is clean. For left hand differential side gear oil seal, similar operations, free the inner CV joint from the transmission and rest the driveshaft on the subframe and refit it, be sure to push the inner CV joint all the way into the transmission to let the retaining circlip lock in place. For input shaft oil seal, remove the transmission, remove the clutch release bearing from the release fork and remove the release fork from the pivot ball-stud. Remove the guide sleeve from the bellhousing, lever out the old oil seal and clean the seat of the oil seal. Lubricate the new seal and fit the same lips to the bellhousing with the lips pointing to the gearcase side by using a socket or appropriate tubing to seat it. Refit the release bearing components in reverse order sparingly lubricating the release fork pivot ball stud with molybdenum desulphated grease and secure the release fork to the slave cylinder lug on the bellhousing with a cable-tie to hold it in place as the transmission is refitted. Finally reassemble the transmission.

Genuine Volvo Differential Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Differential Seals found

View related parts
Volvo Pinion Seal Part Number: 30735124
$25.29 MSRP: $32.39
You Save: $7.10 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Differential Seal; Axle Shaft Seal
Fits the following Volvo Models:
- S40 | 2005-2010 | 2.4i, i, T5, T5 R-Design | 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
- S60 | 2013-2021, 2002-2009 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, Polestar, R, Recharge R-Design, T5, T5 Dynamic, T5 Inscription, T5 Inscription Platinum, T5 Inscription Premier, T5 Momentum, T5 Platinum, T5 Premier, T5 Premier Plus, T5 R-Design, T5 R-Design Special Edition, T6, T6 Inscription, T6 Momentum, T6 Platinum, T6 Polestar, T6 Premier Plus, T6 R-Design, T6 R-Design Platinum, T8 Inscription, T8 Polestar, T8 R-Design, T8 Recharge Inscription, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- S60 Cross Country | 2016-2018 | T5, T5 Platinum | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- S80 | 2013-2015 | 3.2, T5, T6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- S90 | 2017-2021 | T5 Inscription, T5 Momentum, T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS
- V60 | 2015-2019 | Polestar, T5, T5 Dynamic, T5 Momentum, T5 Platinum, T5 Premier, T5 Premier Plus, T5 R-Design, T6 Inscription, T6 Momentum, T6 Polestar, T6 R-Design, T6 R-Design Platinum | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- V60 Cross Country | 2020-2022, 2015-2018 | T5, T5 Platinum | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- V70 | 2003-2007 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5 | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
- V90 | 2018-2021 | T5 Inscription, T5 R-Design, T6 Inscription, T6 R-Design | 4 Cyl 2.0 L GAS
- V90 Cross Country | 2017-2021 | T5, T6, T6 Ocean Race | 4 Cyl 2.0 L GAS
View More
View related parts
Volvo O-Ring Part Number: 925256
$2.76 MSRP: $3.23
You Save: $0.47 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Differential Seal; Axle Shaft Seal
Fits the following Volvo Models:
- S40 | 2005-2010 | 2.4i, i, T5, T5 R-Design | 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
Volvo Coupling Seal, Rear Part Number: 925263
$18.64 MSRP: $23.88
You Save: $5.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: O-Ring;Awd Coupling Unit;Differential; Axle Shaft; Coupling O-Ring, Coupling Seal, Side Seal O-Ring
Fits the following Volvo Models:
- S60 | 2019-2023 | B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, Recharge R-Design, T5 Inscription, T5 Momentum, T5 R-Design, T6 Inscription, T6 Momentum, T6 R-Design, T8 Inscription, T8 Polestar, T8 R-Design, T8 Recharge Core, T8 Recharge Inscription, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression, T8 Recharge Ultimate | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S90 | 2017-2023 | B6 Inscription, B6 Momentum, B6 Plus, B6 R-Design, B6 Ultimate, T5 Inscription, T5 Momentum, T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- V60 | 2019 | T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS
- V60 Cross Country | 2020-2023 | B5 Plus, B5 Ultimate, T5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- V90 | 2018-2021 | T5 Inscription, T5 R-Design, T6 Inscription, T6 R-Design | 4 Cyl 2.0 L GAS
- V90 Cross Country | 2017-2023 | B6, B6 Plus, B6 Ultimate, T5, T6, T6 Ocean Race | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- XC60 | 2018-2023 | B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, B6 Inscription, B6 R-Design, B6 Ultimate, T5 Inscription, T5 Momentum, T5 R-Design, T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- XC90 | 2016-2023, 2003-2014 | 2.5T, 3.2, 3.2 R-Design, B5 Core, B5 Plus, B6 Core, B6 Plus, B6 Ultimate, Base, T5 Inscription, T5 Momentum, T5 R-Design, T6, T6 First Edition, T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.2 L GAS
View More
View related parts
Volvo Drive Unit O-Ring Part Number: 32339078
$18.64 MSRP: $23.88
You Save: $5.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: O-Ring; Differential Seal; Axle Shaft Seal; Drive Unit O-Ring
Fits the following Volvo Models:
- S90 | 2023 | B6 Plus, B6 Ultimate, T8 Recharge Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- V60 | 2023 | T8 Recharge Polestar | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Volvo Pinion Seal Part Number: 1385077
$32.15 MSRP: $37.64
You Save: $5.49 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Differential Seal; Axle Shaft Seal; Dust Shield, Pinion Seal, Rear Seal
Fits the following Volvo Models:
- S80 | 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
- V70 | 2001-2003 | 2.4T, AWD, Base, T5, X/C | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
- XC70 | 2003 | X/C | 5 Cyl 2.5 L GAS
View More
View related parts
Volvo Pinion Seal Part Number: 30713263
$23.27 MSRP: $29.80
You Save: $6.53 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing; Differential Seal; Axle Shaft Seal; Axle Seals, Front Seal, Pinion Seal, Seal
Fits the following Volvo Models:
- S60 | 2022-2023, 2011-2012 | B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, T5, T6, T8 Recharge Core, T8 Recharge Inscription, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression, T8 Recharge Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- S80 | 2007-2012 | 3.2, T6, V8 | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 8 Cyl 4.4 L GAS
- S90 | 2022-2023 | B6 Inscription, B6 Momentum, B6 Plus, B6 R-Design, B6 Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- V60 Cross Country | 2023 | B5 Plus, B5 Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- V90 Cross Country | 2022-2023 | B6, B6 Plus, B6 Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- XC60 | 2022-2023, 2010-2013 | 3.2, 3.2 R-Design, B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, B6 Inscription, B6 R-Design, B6 Ultimate, T6, T6 R-Design | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- XC70 | 2008-2012 | 3.2, T6 | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- XC90 | 2023, 2003-2014 | 2.5T, 3.2, 3.2 R-Design, B5 Core, B5 Plus, B6 Core, B6 Plus, B6 Ultimate, Base, T6, V8, V8 Ocean Race, V8 Sport | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.2 L GAS, 8 Cyl 4.4 L GAS
View More
View related parts
Volvo Axle Seal Part Number: 32339077
$30.50 MSRP: $39.06
You Save: $8.56 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft Seal; Differential Seal; Axle Shaft Seal; Axle Seal, Axle Seals, Drive Unit Seal, Protector
Fits the following Volvo Models:
- S90 | 2023 | B6 Plus, B6 Ultimate, T8 Recharge Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- V60 | 2023 | T8 Recharge Polestar | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC60 | 2023 | T8 Recharge Core, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge Ultimate | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC90 | 2023 | T8 Recharge Core, T8 Recharge Plus, T8 Recharge Ultimate | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Volvo Pinion Seal, Rear Passenger Side Part Number: 31325268
$30.50 MSRP: $39.06
You Save: $8.56 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Axle Shaft Seal, Rear; Differential Seal; Axle Seal, Axle Seals, Pinion Seal
Fits the following Volvo Models:
- S60 | 2013-2023 | B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, Polestar, Recharge R-Design, T5, T5 Dynamic, T5 Inscription, T5 Inscription Platinum, T5 Inscription Premier, T5 Momentum, T5 Platinum, T5 Premier, T5 Premier Plus, T5 R-Design, T5 R-Design Special Edition, T6, T6 Inscription, T6 Momentum, T6 Platinum, T6 Polestar, T6 Premier Plus, T6 R-Design, T6 R-Design Platinum, T8 Inscription, T8 Polestar, T8 R-Design, T8 Recharge Core, T8 Recharge Inscription, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression, T8 Recharge Ultimate | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- S60 Cross Country | 2016-2018 | T5, T5 Platinum | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS
- S80 | 2013-2015 | 3.2, T5, T6 | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- S90 | 2017-2021 | T5 Inscription, T5 Momentum, T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS
- V60 | 2015-2019 | Polestar, T5, T5 Dynamic, T5 Momentum, T5 Platinum, T5 Premier, T5 Premier Plus, T5 R-Design, T6 Inscription, T6 Momentum, T6 Polestar, T6 R-Design, T6 R-Design Platinum | 4 Cyl 2.0 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- V60 Cross Country | 2020-2023, 2015-2018 | B5 Plus, B5 Ultimate, T5, T5 Platinum | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 5 Cyl 2.5 L GAS
- V90 | 2018-2021 | T5 Inscription, T5 R-Design, T6 Inscription, T6 R-Design | 4 Cyl 2.0 L GAS
- V90 Cross Country | 2017-2021 | T5, T6, T6 Ocean Race | 4 Cyl 2.0 L GAS
- XC40 | 2019-2023 | B4 Plus, B4 Ultimate, B5 Core, B5 Plus, B5 Ultimate, T4 Inscription, T4 Momentum, T4 R-Design, T5 Inscription, T5 Momentum, T5 R-Design | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- XC40 Recharge | 2021-2023 | Base, Core, Plus, Ultimate | BATTERY EV (EV/BEV)
View More
View related parts
Volvo Axle Seal Part Number: 31437434
$30.50 MSRP: $39.06
You Save: $8.56 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft Seal; Differential Seal; Axle Shaft Seal; Axle Seal, Axle Seals
Fits the following Volvo Models:
- S60 | 2019-2023 | T8 Inscription, T8 Polestar, T8 R-Design, T8 Recharge Inscription, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S90 | 2018-2022 | B6 Inscription, B6 Momentum, B6 R-Design, T5 Momentum, T6 Inscription, T6 Momentum, T6 R-Design, T8 Inscription, T8 Momentum, T8 R-Design, T8 Recharge Inscription, T8 Recharge R-Design | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- V60 | 2020-2022 | T8 Polestar, T8 Recharge Polestar | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC60 | 2018-2022 | B5 Inscription, B5 Momentum, B5 R-Design, B6 Inscription, B6 Momentum, B6 R-Design, T8 Inscription, T8 Momentum, T8 Polestar, T8 R-Design, T8 Recharge Inscription, T8 Recharge Inscription Expression, T8 Recharge Polestar, T8 Recharge R-Design | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC90 | 2016-2022 | T8 Excellence, T8 Inscription, T8 Momentum, T8 R-Design, T8 Recharge Inscription, T8 Recharge Inscription Expression, T8 Recharge R-Design | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Volvo Axle Seal Part Number: 32240039
$30.50 MSRP: $39.06
You Save: $8.56 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft Seal; Differential Seal; Axle Shaft Seal; Axle Seal, Axle Seals
Fits the following Volvo Models:
- S90 | 2022-2023 | B6 Inscription, B6 Momentum, B6 Plus, B6 R-Design, B6 Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- V90 Cross Country | 2022-2023 | B6, B6 Plus, B6 Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- XC60 | 2022-2023 | B6 Inscription, B6 R-Design, B6 Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Volvo Axle Seal Part Number: 8653928
$30.50 MSRP: $39.06
You Save: $8.56 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Shaft Seal; Differential Seal; Oil Seal
Fits the following Volvo Models:
- 960 | 1992-1997 | Base | 6 Cyl 2.9 L GAS
- S40 | 2005-2010 | 2.4i, i, T5, T5 R-Design | 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
- S60 | 2011-2012, 2002-2009 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5, T6 | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- S80 | 2004-2012 | 2.5T, 2.5T AWD, 2.9, 3.2, T6, T6 Premier, V8 | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 8 Cyl 4.4 L GAS
- S90 | 1997-1998 | Base | 6 Cyl 2.9 L GAS
- V70 | 1998-2007 | 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, GLT, GLT SE, R, R AWD, T5, X/C, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
- V90 | 1997-1998 | Base | 6 Cyl 2.9 L GAS
- XC60 | 2010-2013 | 3.2, 3.2 R-Design, T6, T6 R-Design | 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- XC70 | 2008-2012, 2003 | 3.2, T6, X/C | 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- XC90 | 2003-2014 | 2.5T, 3.2, 3.2 R-Design, Base, T6, V8, V8 Ocean Race, V8 Sport | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.2 L GAS, 8 Cyl 4.4 L GAS
View More
View related parts
Volvo Axle Seal Part Number: 32339079
$65.56 MSRP: $84.65
You Save: $19.09 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft Seal; Differential Seal; Axle Shaft Seal; Axle Seal, Axle Seals, Drive Unit Seal
Fits the following Volvo Models:
- S90 | 2023 | B6 Plus, B6 Ultimate, T8 Recharge Ultimate | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- V60 | 2023 | T8 Recharge Polestar | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC60 | 2023 | T8 Recharge Core, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge Ultimate | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC90 | 2023 | T8 Recharge Core, T8 Recharge Plus, T8 Recharge Ultimate | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Volvo Axle Seal, Passenger Side Part Number: 31437433
$65.56 MSRP: $84.65
You Save: $19.09 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Shaft Seal; Differential Seal; Axle Shaft Seal; Axle Seal, Axle Seals
Fits the following Volvo Models:
- S60 | 2019-2023 | T8 Inscription, T8 Polestar, T8 R-Design, T8 Recharge Inscription, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S90 | 2018-2022 | B6 Inscription, B6 Momentum, B6 R-Design, T5 Momentum, T6 Inscription, T6 Momentum, T6 R-Design, T8 Inscription, T8 Momentum, T8 R-Design, T8 Recharge Inscription, T8 Recharge R-Design | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- V60 | 2020-2022 | T8 Polestar, T8 Recharge Polestar | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- XC90 | 2016-2022 | T8 Excellence, T8 Inscription, T8 Momentum, T8 R-Design, T8 Recharge Inscription, T8 Recharge Inscription Expression, T8 Recharge R-Design | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View More
View related parts
Volvo Pinion Seal Part Number: 32240128
$65.56 MSRP: $84.65
You Save: $19.09 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Kit; Differential Seal; Axle Shaft Seal; Dust Shield, Pinion Seal, Seal Kit
- Replaces: 8675238
Fits the following Volvo Models:
- S60 | 2019-2023 | B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, Recharge R-Design, T5 Inscription, T5 Momentum, T5 R-Design, T6 Inscription, T6 Momentum, T6 R-Design, T8 Inscription, T8 Polestar, T8 R-Design, T8 Recharge Core, T8 Recharge Inscription, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge R-Design Expression, T8 Recharge Ultimate | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- S90 | 2017-2023 | B6 Inscription, B6 Momentum, B6 Plus, B6 R-Design, B6 Ultimate, T5 Inscription, T5 Momentum, T6 Inscription, T6 Momentum, T6 R-Design, T8 Inscription, T8 Momentum, T8 R-Design, T8 Recharge Inscription, T8 Recharge R-Design, T8 Recharge Ultimate | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
- V60 | 2019 | T5 Momentum, T5 R-Design, T6 Inscription, T6 Momentum, T6 R-Design | 4 Cyl 2.0 L GAS
- V60 Cross Country | 2020-2023 | B5 Plus, B5 Ultimate, T5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- V70 | 2007 | 2.4, 2.5T | 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
- V90 | 2018-2021 | T5 Inscription, T5 R-Design, T6 Inscription, T6 R-Design | 4 Cyl 2.0 L GAS
- V90 Cross Country | 2017-2023 | B6, B6 Plus, B6 Ultimate, T5, T6, T6 Ocean Race | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- XC60 | 2010-2023 | 3.2, 3.2 R-Design, B5 Core, B5 Inscription, B5 Momentum, B5 Plus, B5 R-Design, B5 Ultimate, B6 Inscription, B6 Momentum, B6 R-Design, B6 Ultimate, T5, T5 Dynamic, T5 Inscription, T5 Momentum, T5 Platinum, T5 Premier, T5 R-Design, T6, T6 Dynamic, T6 Inscription, T6 Momentum, T6 Ocean Race, T6 Platinum, T6 Premier, T6 R-Design, T6 R-Design Platinum, T8 Inscription, T8 Momentum, T8 Polestar, T8 R-Design, T8 Recharge Core, T8 Recharge Inscription, T8 Recharge Inscription Expression, T8 Recharge Plus, T8 Recharge Polestar, T8 Recharge R-Design, T8 Recharge Ultimate | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
- XC90 | 2016-2023, 2011-2014, 2003-2006 | 2.5T, 3.2, 3.2 R-Design, B5 Core, B5 Plus, B6 Core, B6 Plus, B6 Ultimate, Base, T5 Inscription, T5 Momentum, T5 R-Design, T6, T6 First Edition, T6 Inscription, T6 Momentum, T6 R-Design, V8, V8 Ocean Race | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.2 L GAS, 8 Cyl 4.4 L GAS
View More
View related parts
Volvo Pinion Seal Part Number: 9143317
$11.47 MSRP: $15.28
You Save: $3.81 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Differential Pinion Seal; Axle Shaft Seal; Front Seal, Pinion Seal, Seal
Fits the following Volvo Models:
- 240 | 1991-1993 | Base, GL, SE | 4 Cyl 2.3 L GAS
- 740 | 1991-1992 | Base, T | 4 Cyl 2.3 L GAS
- 780 | 1991 | Base | 4 Cyl 2.3 L GAS
- 940 | 1991-1994 | Base, GL, GLE, SE, T | 4 Cyl 2.3 L GAS
- 960 | 1992-1994 | Base | 6 Cyl 2.9 L GAS
View More
View related parts
Volvo Pinion Seal Part Number: 9143287
Product Specifications
- Other Name: Sealing Ring; Differential Pinion Seal; Differential Seal; Front Seal, Pinion Seal, Seal
Fits the following Volvo Models:
- 940 | 1995 | Base, T | 4 Cyl 2.3 L GAS
- 960 | 1995-1997 | Base | 6 Cyl 2.9 L GAS
- S70 | 1998-2000 | AWD, Base, GLT, GLT SE, T5 | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS
- S90 | 1997-1998 | Base | 6 Cyl 2.9 L GAS
- V70 | 1998-2001 | 2.4T, AWD, Base, GLT, GLT SE, R AWD, T5, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS
- V90 | 1997-1998 | Base | 6 Cyl 2.9 L GAS
View More

Volvo Differential Seal

Volvo Differential Seal helps to keep precious gear oil inside the rear axle and shut out dirt, providing every driver quiet, confident motion. Volvo began building vehicles in 1927 and has since gained a reputation for sturdy build, innovative safety such as the three-point seat belt and clean Scandinavian styling, which favors simple, well-marked controls. The company plays with electric powertrains and plug-in hybrids, but it never devotes itself to sacrificing the solid feel that makes long trips relaxing. Strong brakes and clear instrumentation come standard, as does a culture of concern for both protection and comfort. Whether it is a compact sedan, a spacious wagon, or a heavy-duty truck, Volvo is focused on reliability for families and businesses to travel with peace of mind. The Volvo Differential Seal plays its part in supporting that mission by providing a tight rubber seal where the driveshaft or half shafts meet the axle housing, sealing high-pressure lubricant around spinning gear sets. Each Differential Seal is designed to fit snugly across the brand lineup. This small ring resists heat and rotation thanks to molded synthetic lips and an internal spring to maintain tension and allow free movement of the open or limited slip differential. A healthy Differential Seal keeps back leaks that may cause noisy gears or costly damage, so timely replacement keeps the entire fleet of Volvo vehicles smooth in corners and quiet on highways.

Trust OEM Differential Seal for quality that holds up. These parts use top-tier materials to keep your ride running smooth. Because they match exact Volvo specs, you get a flawless fit and a hassle-free install every single time. No more fighting with parts that just won't line up. It is easy to search our massive stock of genuine Volvo options at prices you will really like. Every part comes with a real manufacturer's warranty and a simple return policy. Plus, we ship fast to get your order to you. Shop with confidence and give your Volvo the reliability it deserves.

Volvo Differential Seal Parts and Q&A

Pinion Seal
9143287
Q: How to replace the right-hand differential seal for the side gear oil on Volvo S70?
A:
To change the right hand differential side gear oil seal, first loosen the right hand side front wheel bolts, then jack up the front of the car and support on axle stands, and remove the right hand side front road wheel. Next, unbolt the ABS wheel sensor from the steering knuckle and unbolt the sensor wiring from the suspension strut bracket. Remove the bolt holding the brake hose and ABS wiring bracket to the inner wheel arch and, if necessary, remove the splash guard under the engine. Undo the nut and remove the clamp bolt that holds the suspension control arm balljoint to the steering knuckle, pushing down on the suspension arm if it is necessary to release the balljoint shank. If the balljoint is tight, use a chisel or large screwdriver to spread the slot in the steering knuckle, being careful not to ruin the balljoint dust cover. Remove the cap from the intermediate shaft support bearing by undoing two bolts and swivel the suspension strut and steering knuckle assembly outwards, pulling the intermediate shaft out of the transmission, resting it on one of the fluid pipes for the steering gear. Carefully prise out the oil seal in the transmission casing with a large screw driver or suitable lever without damaging the transmission casing and wipe clean the oil seal seating. Dip the new oil seal in clean oil, press it partially in the casing by hand, and then either use suitable tubing or a large socket to drive your new oil seal fully into position until flush with the edge of the casing. Refit the driveshaft from the top down tightening all nuts and bolts to the specified torque and ensuring that the ABS sensor and location in the steering knuckle is clean. For left hand differential side gear oil seal, similar operations, free the inner CV joint from the transmission and rest the driveshaft on the subframe and refit it, be sure to push the inner CV joint all the way into the transmission to let the retaining circlip lock in place. For input shaft oil seal, remove the transmission, remove the clutch release bearing from the release fork and remove the release fork from the pivot ball-stud. Remove the guide sleeve from the bellhousing, lever out the old oil seal and clean the seat of the oil seal. Lubricate the new seal and fit the same lips to the bellhousing with the lips pointing to the gearcase side by using a socket or appropriate tubing to seat it. Refit the release bearing components in reverse order sparingly lubricating the release fork pivot ball stud with molybdenum desulphated grease and secure the release fork to the slave cylinder lug on the bellhousing with a cable-tie to hold it in place as the transmission is refitted. Finally reassemble the transmission.