How to replace halogen bulbs and ensure proper headlight aiming on Volvo 960?

To replace the halogen bulbs, open the vehicle's hood and secure the hood. If applicable remove the access cover to the headlight bulb and socket assembly. For bulbs with locking rings, twist and remove the ring, for bulbs without, twist the bulb socket and withdraw the assembly. Gently pry out the electrical connector's retaining clip if needed then remove the bulb and socket assembly. Before installing a new bulb always make sure all electrical contact surfaces are clean. Aligned the replacement assembly with the electrical connector and pushing it firmly until the spring clip latches. Activate the switch and see if the bulb lights up, if it doesn't troubleshoot the bulb circuit or switch. Position the new bulb and lock the locking ring if applicable and reinstall the access cover and close the hood. For sealed beam units, disconnect the battery cable, release the headlight trim, unfasten the screws holding the retainer and unplug the electrical connector. Following installation is in the reverse order. Proper aiming of headlights is very important to ensure safe illumination of the road and should be checked periodically, especially after bulb replacement or front-end work. A temporary adjustment can be made using a wall; park the vehicle on a level surface facing a wall and mark the low and high beam positions and make the adjustments to the beams accordingly. Make sure that the vehicle is in the same position during this process and have the adjustment checked by a professional as soon as possible.

Genuine Volvo 960 Headlight

Headlamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Headlights found

View related parts
Volvo 960 Headlamp Assembly, Driver Side Part Number: 1369603
$216.80 MSRP: $258.10
You Save: $41.30 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Left; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1992-1994 | Base | 6 Cyl 2.9 L GAS
View related parts
Volvo 960 Headlamp Assembly, Passenger Side Part Number: 1369604
$216.80 MSRP: $258.10
You Save: $41.30 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Right; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1992-1994 | Base | 6 Cyl 2.9 L GAS
View related parts
Volvo 960 Composite Assembly, Passenger Side Part Number: 3534194
$226.96 MSRP: $270.19
You Save: $43.23 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp Insert; Daytime Running Lights; Headlight; Composite Assembly, Headlamp
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1993-1994 | Base | 6 Cyl 2.9 L GAS
View related parts
Volvo 960 Headlamp Assembly, Driver Side Part Number: 9126610
$269.30 MSRP: $320.60
You Save: $51.30 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Left; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1995-1997 | Base | 6 Cyl 2.9 L GAS
View related parts
Volvo 960 Headlamp Assembly, Passenger Side Part Number: 9126611
$327.46 MSRP: $389.83
You Save: $62.37 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Right; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1995-1997 | Base | 6 Cyl 2.9 L GAS
View related parts
Volvo 960 Headlamp Assembly, Driver Side Part Number: 1358540
$316.22 MSRP: $376.45
You Save: $60.23 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Left; Daytime Running Lights; Headlight; Composite Assembly, Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1992-1994 | Base | 6 Cyl 2.9 L GAS
View related parts
Volvo 960 Headlamp Assembly, Passenger Side Part Number: 1358541
$343.50 MSRP: $408.93
You Save: $65.43 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp, Right; Daytime Running Lights; Headlight; Headlamp Assembly
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1992-1994 | Base | 6 Cyl 2.9 L GAS

Volvo 960 Headlight

The Volvo 960 Headlight provides the driver with clear visibility even after the sun goes down and makes the car conspicuous to other users on the road. Based on a modern composite unit, which seems to fit well with the bodywork, this Headlight can also have parking, running and turn-signal features, enhancing aerodynamics in addition to style. The Volvo model has been using three primary sources of illumination over the years. Conventional halogen lamps combine tungsten wire with halogen gas and provide cheap lighting but have a shorter lifespan. Recent LED systems transform energy into light using semiconductors, consuming energy and having a lifespan of years. Xenon, or HID, is applied to pressurize the xenon gas in the capsule and forms an intense white or bluish beam and falls between halogen and LED in price and energy use. No matter the source, every Headlight should give different high-beam and low-beam patterns to ensure that the driver can see a long way without blinding oncoming traffic. Plastic lenses cover the reflector and are also clouded with time due to ultraviolet and road grit which blur vision until the reflector is cleaned or replaced. Customers considering an upgrade for a second-generation 960 can adjust brightness, color temperature and lifespan to individual requirements without altering factory wiring and aiming geometry. With this development, all Volvo vehicles in the line still project a confident and controlled cone of light that protects passengers and other vehicles even during nighttime, which supports the Volvo safety credo in traveling.

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Headlight and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo 960 parts. The prices are unbeatable, allowing you to get value for money. Each genuine 960 Headlight comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo 960 Headlight Parts and Q&A

Headlamp Assembly, Driver Side
1358540
Q: How to replace halogen bulbs and ensure proper headlight aiming on Volvo 960?
A:
To replace the halogen bulbs, open the vehicle's hood and secure the hood. If applicable remove the access cover to the headlight bulb and socket assembly. For bulbs with locking rings, twist and remove the ring, for bulbs without, twist the bulb socket and withdraw the assembly. Gently pry out the electrical connector's retaining clip if needed then remove the bulb and socket assembly. Before installing a new bulb always make sure all electrical contact surfaces are clean. Aligned the replacement assembly with the electrical connector and pushing it firmly until the spring clip latches. Activate the switch and see if the bulb lights up, if it doesn't troubleshoot the bulb circuit or switch. Position the new bulb and lock the locking ring if applicable and reinstall the access cover and close the hood. For sealed beam units, disconnect the battery cable, release the headlight trim, unfasten the screws holding the retainer and unplug the electrical connector. Following installation is in the reverse order. Proper aiming of headlights is very important to ensure safe illumination of the road and should be checked periodically, especially after bulb replacement or front-end work. A temporary adjustment can be made using a wall; park the vehicle on a level surface facing a wall and mark the low and high beam positions and make the adjustments to the beams accordingly. Make sure that the vehicle is in the same position during this process and have the adjustment checked by a professional as soon as possible.