How should the oil pan and gasket be prepared and installed on Volvo 245?

Make sure that you thoroughly clean the oil pan and all traces of the old oil pan gasket have been removed from the flanges of the oil pan and the crankcase. Fit the new gasket to the crankcase, and then lightly grease the flange on the oil pan. Place the oil pan in position and fit the spring washers and bolts tightening them to a torque setting of 6-8 lb ft (0.8-1.1 kg m).

Genuine Volvo 245 Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pan found

View related parts
Volvo 245 Oil Pan Part Number: 1276121
$439.24 MSRP: $522.90
You Save: $83.66 (16%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1985-1989 | Base, DL, GL | 4 Cyl 2.1 L GAS, 4 Cyl 2.3 L GAS

Volvo 245 Oil Pan

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Oil Pan and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo 245 parts. The prices are unbeatable, allowing you to get value for money. Each genuine 245 Oil Pan comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo 245 Oil Pan Parts and Q&A

Oil Pan
1276121
Q: How should the oil pan and gasket be prepared and installed on Volvo 245?
A:
Make sure that you thoroughly clean the oil pan and all traces of the old oil pan gasket have been removed from the flanges of the oil pan and the crankcase. Fit the new gasket to the crankcase, and then lightly grease the flange on the oil pan. Place the oil pan in position and fit the spring washers and bolts tightening them to a torque setting of 6-8 lb ft (0.8-1.1 kg m).