How to remove and refit a sealed hub bearing assembly on Steering Knuckle and front Wheel Bearing on 2009 Volvo S40?

The hub bearing is a sealed, pre-lubricated assembly meant to last the life of the car with no maintenance. To remove it, loosen the driveshaft bolt, the wheel nuts, and components such as brake disc and ABS sensor. Reassembly requires cleaning of surfaces, use of a new driveshaft screw and torquing to specified.

Genuine 2009 Volvo S40 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2009 Volvo S40 Knuckle, Passenger Side Part Number: 30760281
$616.08 MSRP: $815.78
You Save: $199.70 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Knuckle; Knuckle
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30760281
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2009 Volvo S40 Submodels:
- 2.4i, T5, T5 R-Design | 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
2009 Volvo S40 Knuckle, Driver Side Part Number: 30760282
$616.08 MSRP: $815.78
You Save: $199.70 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Knuckle; Knuckle
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30760282
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2009 Volvo S40 Submodels:
- 2.4i, T5, T5 R-Design | 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS

2009 Volvo S40 Steering Knuckle Parts and Q&A

Q: How to remove and refit a sealed hub bearing assembly on Steering Knuckle and front Wheel Bearing on 2009 Volvo S40?
A: The hub bearing is a sealed, pre-lubricated assembly meant to last the life of the car with no maintenance. To remove it, loosen the driveshaft bolt, the wheel nuts, and components such as brake disc and ABS sensor. Reassembly requires cleaning of surfaces, use of a new driveshaft screw and torquing to specified.