How to replace the Axle Shaft Seal on 2006 Volvo S80?

To replace driveshaft seals, remove the driveshaft, and carefully remove the oil seal with a screwdriver. Clean the seating, grease the new seal and press it in. For the input shaft seal, remove the transmission, drill a hole in the old seal and remove it. Lubricate and place the new seal and reassemble.

Genuine 2006 Volvo S80 Axle Shaft Seal

CV Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Axle Shaft Seals found

View related parts
2006 Volvo S80 Pinion Seal Part Number: 1385077
$32.15 MSRP: $37.64
You Save: $5.49 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sealing Ring; Differential Seal; Axle Shaft Seal; Dust Shield, Pinion Seal, Rear Seal
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1385077
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2006 Volvo S80 Submodels:
- 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
2006 Volvo S80 Axle Seal Part Number: 8653928
$30.57 MSRP: $39.15
You Save: $8.58 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Shaft Seal; Differential Seal; Oil Seal
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8653928
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2006 Volvo S80 Submodels:
- 2.5T, 2.5T AWD, 2.9, 3.2, T6, T6 Premier, V8 | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 8 Cyl 4.4 L GAS

2006 Volvo S80 Axle Shaft Seal Parts and Q&A

Q: How to replace the Axle Shaft Seal on 2006 Volvo S80?
A: To replace driveshaft seals, remove the driveshaft, and carefully remove the oil seal with a screwdriver. Clean the seating, grease the new seal and press it in. For the input shaft seal, remove the transmission, drill a hole in the old seal and remove it. Lubricate and place the new seal and reassemble.