How to remove and refit the Trunk Lid Latch assembly and related components from the boot lid on 2005 Volvo S80?

Take the alert triangle and boot trim panel away and unbolt and remove the lock assembly wiring and cable. Take out the lock release button by disassembling the nuts and wiring of the lock. Take out the lock cylinder by disconnecting the retaining nut and cable. OLAP Refit all.

Genuine 2005 Volvo S80 Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trunk Lid Latches found

View related parts
2005 Volvo S80 Lock Assembly Part Number: 31253048
$245.15 MSRP: $319.20
You Save: $74.05 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock; Trunk Lid Latch; Door Lock; Lock Assembly
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31253048
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2005 Volvo S80 Submodels:
- 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
2005 Volvo S80 Lock Assembly Part Number: 31253052
$245.15 MSRP: $319.20
You Save: $74.05 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock; Trunk Lid Latch; Door Lock; Lock Assembly
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31253052
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2005 Volvo S80 Submodels:
- 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS

2005 Volvo S80 Trunk Lid Latch Parts and Q&A

Q: How to remove and refit the Trunk Lid Latch assembly and related components from the boot lid on 2005 Volvo S80?
A: Take the alert triangle and boot trim panel away and unbolt and remove the lock assembly wiring and cable. Take out the lock release button by disassembling the nuts and wiring of the lock. Take out the lock cylinder by disconnecting the retaining nut and cable. OLAP Refit all.