How to properly remove and reinstall the track rod end while considering the Rack and Pinion Boot on 2002 Volvo V70?

Count the exposed threads on the track rod, then remove the track rod end by unscrewing the locknut. Peel off the gaiter, clean the inner track rod, and wrap insulating tape around the threads. Refit the locknut to show the same number of threads and reattach the track rod end.

Genuine 2002 Volvo V70 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinion Boots found

View related parts
2002 Volvo V70 Tie Rod Boot Part Number: 271601
$54.53 MSRP: $69.31
You Save: $14.78 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Rack & Pinion Boot/Bellows Kit; Boot, Boot Kit, Inner Tie Rod Boot, Tie Rod Boot
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 271601
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2002 Volvo V70 Submodels:
- 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, GLT, GLT SE, R, R AWD, T5, X/C, X/C AWD, X/C AWD SE | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS
View related parts
2002 Volvo V70 Tie Rod Boot Part Number: 272418
$56.83 MSRP: $72.22
You Save: $15.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Power Steering Cylinder Boot Kit; Boot Kit, Tie Rod Boot
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 272418
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2002 Volvo V70 Submodels:
- 2.4, 2.4T, 2.5T, 2.5T AWD, AWD, Base, R, T5, X/C | 5 Cyl 2.3 L GAS, 5 Cyl 2.4 L GAS, 5 Cyl 2.5 L GAS

2002 Volvo V70 Rack and Pinion Boot Parts and Q&A

Q: How to properly remove and reinstall the track rod end while considering the Rack and Pinion Boot on 2002 Volvo V70?
A: Count the exposed threads on the track rod, then remove the track rod end by unscrewing the locknut. Peel off the gaiter, clean the inner track rod, and wrap insulating tape around the threads. Refit the locknut to show the same number of threads and reattach the track rod end.