How to install the ball bearing onto the pinion shaft in rack and pinions and complete the assembly process on 1987 Volvo 244?

Press on the ball bearing onto the pinion shaft, slip on the circlip and thrust washer, and place new 'O' rings on the rack bushing. Lubricate the rack and pinions, tighten the nut and check the torque. Adjust preload if necessary, fill with grease, and fit steering rods.

Genuine 1987 Volvo 244 Rack and Pinions

Steering Rack

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinions found

View related parts
1987 Volvo 244 Gear Assembly Part Number: 3516943
$621.78 MSRP: $752.76
You Save: $130.98 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering Gear; Rack And Pinions; Gear Assembly
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3516943
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 1987 Volvo 244 Submodels:
- DL, GL, Turbo | 4 Cyl 2.1 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.4 L DIESEL

1987 Volvo 244 Rack and Pinions Parts and Q&A

Q: How to install the ball bearing onto the pinion shaft in rack and pinions and complete the assembly process on 1987 Volvo 244?
A: Press on the ball bearing onto the pinion shaft, slip on the circlip and thrust washer, and place new 'O' rings on the rack bushing. Lubricate the rack and pinions, tighten the nut and check the torque. Adjust preload if necessary, fill with grease, and fit steering rods.