How to remove and refit the horn from the bonnet on Volvo V40?

To remove the horn, open the bonnet, unscrew the retaining bolt and remove the horn from the bonnet lock cross member and disconnect the horn from the wiring connector. For refitting, reconnect the wiring connector, give the horn back to the crossmember, make sure the retaining bolt is tightened.

Genuine Volvo V40 Horn

Alarm Horn

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Horns found

View related parts
Volvo V40 Horn, Driver Side Part Number: 30855941
$39.04 MSRP: $45.71
You Save: $6.67 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2000-2004 | Base, LSE | 4 Cyl 1.9 L GAS
View related parts
Volvo V40 Horn, Passenger Side Part Number: 30855942
$39.04 MSRP: $45.71
You Save: $6.67 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2000-2004 | Base, LSE | 4 Cyl 1.9 L GAS

Volvo V40 Horn

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Horn and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo V40 parts. The prices are unbeatable, allowing you to get value for money. Each genuine V40 Horn comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo V40 Horn Parts and Q&A

Horn, Driver Side
30855941
Q: How to remove and refit the horn from the bonnet on Volvo V40?
A:
To remove the horn, open the bonnet, unscrew the retaining bolt and remove the horn from the bonnet lock cross member and disconnect the horn from the wiring connector. For refitting, reconnect the wiring connector, give the horn back to the crossmember, make sure the retaining bolt is tightened.