How to remove and refit the bumpers on Volvo S80?

The bumpers are made up of several sections, and, once the bumpers assembly has been removed, the outer cover can be unclipped and the bumper dismantled, however, it is not known if the individual sections that the bumper is made up of are available individually. For front bumper removal in V70 models, open the bonnet and remove, if appropriate, the wiper arm securing nuts and washer supply hoses. Carefully prise the plastic trim strips off from underneath each headlamp and undo the retaining screws below the headlamps and remove the plastic expansion rivets on the top edge and underneath of the bumper. In the wheel arch, loosen the bumper side mounting screws until there are only three threads left in them and shift them forward to release the mounting. For models after 2004, undo the Torx screws which hold the bumper to the wing, remove the screws in the trim recess under the headlights and remove the plastic expansion rivets along the top edge of the bumper. With help, pull the bumper sides outwards slightly and remove the bumper from the vehicle disconnecting any wiring plugs and separating the hose at the quick release connector if fitted with headlight washers. For S80 models, open the bonnet, un-do wiper arm fixing nuts and un-do the side markers before prising out the plastic trim strips. For models prior to 2003, remove plastic expansion rivets and drill out rivets that hold the bumper onto the wheel-arch liner then undo the bolts and pull the bumper forward with help. For models after 2003, undo the screws that hold the bumper to the wing, remove plastic expansion rivets, and pull the bumper forward with wiring plugs. Refitting is a reverse of removal ensuring side mountings are properly engaged. For removal of the rear bumper on V70 models, remove battery, access panels, luggage compartment floor panel and tool tray, undo the bumper retaining nuts, and drill out the rivets holding the bumper to the wheel arch liner. For models after 2004, remove screws that hold the bumper to the wheel arch, undo the retaining nuts and remove plastic expansion rivets. With help, pull the bumper backwards and disconnect any wiring plugs. For S80 models, open the boot, fold up the carpet and remove the boot sill trim then undo the bumper retaining nuts and drill out rivets. Finally, refitting is an inverse of removal, to ensure proper engagement of side mountings.

Genuine Volvo S80 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

163 Bumpers found

View related parts
Volvo S80 Bumper Cover, Mistral Green Part Number: 39976149
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover Part Number: 39976159
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Midnight Blue Part Number: 39976374
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1999-2003 | 2.9, T6 | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover Part Number: 39976389
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1999-2003 | 2.9, T6 | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Crystal Green Part Number: 39977572
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Deep Blue Part Number: 39980695
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Black Part Number: 39985993
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Ash Gold Part Number: 39985997
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2005 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Mistral Green Part Number: 39985999
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover Part Number: 39986005
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Ice White Part Number: 39986007
$574.15 MSRP: $777.98
You Save: $203.83 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Silver Part Number: 39976139
$576.10 MSRP: $780.61
You Save: $204.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover Part Number: 39976362
$576.10 MSRP: $780.61
You Save: $204.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1999-2003 | 2.9, T6 | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Black Part Number: 39976368
$576.10 MSRP: $780.61
You Save: $204.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1999-2003 | 2.9, T6 | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Ice White Part Number: 39980697
$576.10 MSRP: $780.61
You Save: $204.51 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Silver Part Number: 39985996
$592.36 MSRP: $802.65
You Save: $210.29 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover Part Number: 39976365
$604.33 MSRP: $832.74
You Save: $228.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1999-2003 | 2.9, T6 | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Blue Pearl Part Number: 39976377
$604.33 MSRP: $832.74
You Save: $228.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1999-2003 | 2.9, T6 | 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Ruby Red Part Number: 39986003
$604.33 MSRP: $832.74
You Save: $228.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS
View related parts
Volvo S80 Bumper Cover, Crystal Green Part Number: 39986004
$604.33 MSRP: $832.74
You Save: $228.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 2004-2006 | 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS

| Page 1 of 9 |Next >

1-20 of 163 Results

Volvo S80 Bumper

Volvo S80 Bumper is the front and rear protector of the car, which is designed to absorb the impacts of low speed collisions so that the cabin and other crucial systems remain intact. The factory units use a hard plastic shell and are applied with either foam or honeycomb energy absorbers, crumpling, folding, and overlapping on the impact of a knock, saving sheet metal, lights, and even the exhaust. Years of corrosion, dents, and scrapes may undermine this defense and thus Volvo owners are advised to install direct-fit solutions that replicate original strength, finish, and fit. The original and subsequent redesign were both conservative in terms of styling, but buyers had the option of smooth painted or chrome-accented trims, the great distinction being the surface finish, but not the internal structure, which was still a reinforced bar behind the skin. The hardware provided and clear kits allow an owner to install within minutes, making both early and second-series Volvo S80 models accept these updated bits with no modification. The quality replacements are subjected to strict tests to ensure that all Volvos do not lose their reputation for safety. The right fit can be selected without much struggle because all you need to do is input a few Volvo details in an online picker, and the fit is perfect. The replacement Bumper is powder-coated black to resist rusting until the body-color paint is applied. The sedan has a new Bumper installed, it appears fresh and is eager to protect people during their daily trips.

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Bumper and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo S80 parts. The prices are unbeatable, allowing you to get value for money. Each genuine S80 Bumper comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo S80 Bumper Parts and Q&A

Bumper Cover, Black
39976129
Q: How to remove and refit the bumpers on Volvo S80?
A:
The bumpers are made up of several sections, and, once the bumpers assembly has been removed, the outer cover can be unclipped and the bumper dismantled, however, it is not known if the individual sections that the bumper is made up of are available individually. For front bumper removal in V70 models, open the bonnet and remove, if appropriate, the wiper arm securing nuts and washer supply hoses. Carefully prise the plastic trim strips off from underneath each headlamp and undo the retaining screws below the headlamps and remove the plastic expansion rivets on the top edge and underneath of the bumper. In the wheel arch, loosen the bumper side mounting screws until there are only three threads left in them and shift them forward to release the mounting. For models after 2004, undo the Torx screws which hold the bumper to the wing, remove the screws in the trim recess under the headlights and remove the plastic expansion rivets along the top edge of the bumper. With help, pull the bumper sides outwards slightly and remove the bumper from the vehicle disconnecting any wiring plugs and separating the hose at the quick release connector if fitted with headlight washers. For S80 models, open the bonnet, un-do wiper arm fixing nuts and un-do the side markers before prising out the plastic trim strips. For models prior to 2003, remove plastic expansion rivets and drill out rivets that hold the bumper onto the wheel-arch liner then undo the bolts and pull the bumper forward with help. For models after 2003, undo the screws that hold the bumper to the wing, remove plastic expansion rivets, and pull the bumper forward with wiring plugs. Refitting is a reverse of removal ensuring side mountings are properly engaged. For removal of the rear bumper on V70 models, remove battery, access panels, luggage compartment floor panel and tool tray, undo the bumper retaining nuts, and drill out the rivets holding the bumper to the wheel arch liner. For models after 2004, remove screws that hold the bumper to the wheel arch, undo the retaining nuts and remove plastic expansion rivets. With help, pull the bumper backwards and disconnect any wiring plugs. For S80 models, open the boot, fold up the carpet and remove the boot sill trim then undo the bumper retaining nuts and drill out rivets. Finally, refitting is an inverse of removal, to ensure proper engagement of side mountings.