What is the role of a Camber and Alignment Kit in defining a steering and suspension geometry on Volvo S70?

Question

Accepted Answer

A car's steering and suspension geometry is defined by four basic settings, with all angles expressed in degrees, including camber, castor, steering axis inclination, and toe setting, while only the front camber and front and rear wheel toe settings are adjustable on the models discussed. Camber refers to the angle of the front wheels from the vertical when viewed from the front or rear, with negative camber indicating inward tilt at the top. The front camber angle is adjusted by loosening the steering knuckle-to-suspension strut mounting bolts and repositioning the steering knuckle assemblies. Castor is the angle between the steering axis and a vertical line when viewed from the side, with positive castor indicating a rearward inclination at the top. Steering axis inclination is the angle between the vertical and an imaginary line drawn through the front suspension strut upper mounting and the control arm balljoint when viewed from the front. Toe setting measures the difference in distance between the front inside edges of the roadwheels and the diametrically opposite distance at the rear, with toe-in indicating inward pointing wheels and toe-out indicating outward splaying. The front wheel toe setting is adjusted by changing the length of the steering track rods, while the rear wheel toe setting is adjusted by altering the position of the rear suspension transverse arm-to-trailing arm mountings. Except for the front and rear toe settings and front camber angles, all other suspension and steering angles are set during manufacture and are not adjustable, assuming no accident damage has occurred. Special optical measuring equipment is required to accurately check and adjust the front and rear toe settings and front camber angles, and this work should be performed by a qualified expert, although most tyre-fitting centres can conduct at least a front wheel toe setting check for a nominal fee.

Genuine Volvo S70 Camber and Alignment Kit

8 Camber and Alignment Kits found

Volvo S70 Lower Control Arm Bolt Part Number: 982847

Volvo S70 Engine Cradle Bolt Part Number: 981534

Volvo S70 Control Arm Bolt Part Number: 982849

Volvo S70 Power Steering Pump Bolt Part Number: 982812

Volvo S70 Upper Control Arm Bolt Part Number: 982850

Volvo S70 Track Bar Adjust Cam Part Number: 31201493

Volvo S70 Lower Control Arm Bolt Part Number: 985200

Volvo S70 Steering Column Bolt Part Number: 982828

Volvo S70 Camber and Alignment Kit

Volvo S70 Camber and Alignment Kit Parts and Q&A

Related Volvo S70 Parts

Browse by Year