What should you do if the twin horns fail to operate on Volvo 245?

Twin horns are installed behind the radiator grille and do not require any attention. If they are not working, it is important to test the circuit fuse and connecting wiring. To check the horn switch, lever off the crash-pad from the center of the steering wheel, unscrew the retaining screws and remove the contact bar. If the fault has been rectified by the fuse, wiring and switch being correct, but it still remains, the horn should be renewed.

Genuine Volvo 245 Horn

Alarm Horn

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Horn found

View related parts
Volvo 245 Horn Part Number: 1235450
$55.11 MSRP: $64.53
You Save: $9.42 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following Vehicles:
- 1984-1989 | Base, DL, GL | 4 Cyl 2.1 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.4 L DIESEL

Volvo 245 Horn

OEM parts are the only choice for top quality and real functionality. They pass strict checks, and they match Volvo's factory specs, so installation is easy. If you need new Horn and you want quality and fit. You will find both here. Our site has a wide range of OEM Volvo 245 parts. The prices are unbeatable, allowing you to get value for money. Each genuine 245 Horn comes with the manufacturer's warranty. That gives you peace of mind. We ship fast to your door. Order today, and enjoy a smooth, no-hassle upgrade with parts that fit right.

Volvo 245 Horn Parts and Q&A

Horn
1235450
Q: What should you do if the twin horns fail to operate on Volvo 245?
A:
Twin horns are installed behind the radiator grille and do not require any attention. If they are not working, it is important to test the circuit fuse and connecting wiring. To check the horn switch, lever off the crash-pad from the center of the steering wheel, unscrew the retaining screws and remove the contact bar. If the fault has been rectified by the fuse, wiring and switch being correct, but it still remains, the horn should be renewed.