How to replace coolant temperature sensors on 2006 Volvo S80?

The coolant temperature sensor in the thermostat housing is used to signal the engine temperature to the management system and gauge. A fault records a code in the ECU that can be accessed through a diagnostic connector. To replace the sensor, drain coolant, remove housing, disconnect wiring and install new sensor with sealant. Reach the coolant level and top up.

Genuine 2006 Volvo S80 Coolant Temperature Sensors

Coolant Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Coolant Temperature Sensors found

View related parts
2006 Volvo S80 Coolant Temperature Sensor Part Number: 8653103
$28.12 MSRP: $36.02
You Save: $7.90 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: IAT Sensor; Coolant Temperature Sensor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8653103
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2006 Volvo S80 Submodels:
- 2.5T, 2.5T AWD | 5 Cyl 2.5 L GAS
View related parts
2006 Volvo S80 Temperature Sensor Part Number: 9445153
$37.42 MSRP: $43.82
You Save: $6.40 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: IAT Sensor; Air Charge Temp; Coolant Temp Sensor; Temperature Sensor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9445153
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 2006 Volvo S80 Submodels:
- 2.5T, 2.5T AWD, 2.9, T6, T6 Premier | 5 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 2.9 L GAS

2006 Volvo S80 Coolant Temperature Sensors Parts and Q&A

Q: How to replace coolant temperature sensors on 2006 Volvo S80?
A: The coolant temperature sensor in the thermostat housing is used to signal the engine temperature to the management system and gauge. A fault records a code in the ECU that can be accessed through a diagnostic connector. To replace the sensor, drain coolant, remove housing, disconnect wiring and install new sensor with sealant. Reach the coolant level and top up.