How to remove and install the Ignition Control Module on the intake manifold for increased cooling on 1994 Volvo 940?

To remove the power stages from the intake manifold to provide more cooling, disconnect the negative battery cable and harness. Loosen the two bolts for each power stage and then remove the bolts. For installation, re-position the power stages, re-tighten the bolts, reconnect the harness and reconnect battery cable.

Genuine 1994 Volvo 940 Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Control Modules found

View related parts
1994 Volvo 940 Ignition Module Part Number: 3545006
$51.17 MSRP: $59.91
You Save: $8.74 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Diagnostic Unit; Ignition Control Module; Control Module, Ignition Module
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3545006
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 1994 Volvo 940 Submodels:
- Base | 4 Cyl 2.3 L GAS
View related parts
1994 Volvo 940 Ignition Module Part Number: 3545007
$24.68 MSRP: $28.90
You Save: $4.22 (15%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Diagnostic Unit; Ignition Control Module; Ignition Module
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3545007
- Warranty: This genuine part is guaranteed by Volvo's factory warranty.
Fits the following 1994 Volvo 940 Submodels:
- T | 4 Cyl 2.3 L GAS

1994 Volvo 940 Ignition Control Module Parts and Q&A

Q: How to remove and install the Ignition Control Module on the intake manifold for increased cooling on 1994 Volvo 940?
A: To remove the power stages from the intake manifold to provide more cooling, disconnect the negative battery cable and harness. Loosen the two bolts for each power stage and then remove the bolts. For installation, re-position the power stages, re-tighten the bolts, reconnect the harness and reconnect battery cable.